HS18-1-2-5
2017-06-13 14:52:25 Origin： Remark：0 Click：
Material technical specification of DIN 1750 -1980 high speed tool steel HS18-1-2-5 datasheet,DiN HS18-1-2-5 Chemical compositions, HS18-1-2-5 Mechanical properties from Steelmaking, DIN HS18-1-2-5 ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification - DIN 17350 1980. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET: DIN HS18-1-2-5
MATERIAL CATEGORY: High speed tool steel
MATERIAL SPECIFICATIONS: DIN 17350 1980
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.75 ~ 0.83
Si (％): ≤ 0.45
Mn (％): ≤ 0.40
P (％)≤: 0.030
S (％)≤: 0.030
Cr (%): 3.80 ~ 4.50
Mo (%): 0.50 ~ 0.80
W (%): 17.5 ~ 18.5
V (%): 1.40 ~ 1.70
Co (%): 4.50 ~ 5.00
MECHANICAL PROPERTY AND HARDNESS
Annealing temperature /℃: 820 ~ 850
Annealed hardness, ≤ HB: 240 ~ 300
Heating: 450 ~ 650
First preheat temperature /℃: 850
Second preheat temperature /℃: 1050
Last heating temperature /℃: 1260 ~ 1300
Tempering temperature /℃: 550 ~ 570
Hardness after tempering ≥HRC: 64
First preheat temperature /℃: 850
Second preheat temperature /℃: 1050
Last heating temperature /℃: 1260 ~ 1300
Tempering temperature /℃: 550 ~ 570
Hardness after tempering ≥HRC: 64
Cooling medium: air / oil
MELTING PROCESS
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, LF + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 0.50 to 600mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
MELTING PROCESS
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, LF + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 0.50 to 600mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email us: lh.steel@hotmail.com
Hot search：HS18-1-2-5
Previous page：Aquamet 19
Last page：Z6CNNb18-12B
