Z160CDV12
2020-06-24 17:48:38 Origin： Remark：0 Click：
Stocklist Z160CDV12 Datasheet, Inventory Z160CDV12 Chemical, Specifications alloy Z160CDV12 properties from Steelmaking, ESR melted, Hot blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working,Peeled or rough turned machining.Technical specification - NF A35-590 1992. We also possess the advanced precision machining equipments for catering for your different requirement
TECHNCIAL DATA SHEET - Grade Z160CDV12
OFFICIAL TEST REPORT: issued by TUV - SGS - BV
MATERIAL CATEGORY - Cold work alloy tool steel
MATERIAL SPECIFICATIONS - NF A35-590 1992
CHEMICAL COMPOSITION ( Mass weight - % )
C (％): 1.45 ~ 1.70
Si (％): 0.10 ~ 0.40
Mn (％): 0.15 ~ 0.45
P (％)≤: 0.030
S (％)≤: 0.030
Cr (%): 11.0 ~ 13.0
Mo (％): 0.70 ~ 1.10
Ni (%): -
V (%): 0.70 ~ 1.00
HEAT TREATMENT PRACTICE AND HARDNESS
Hardness after annealing ≤HBW: 255
Quenching temperature ℃: 1020
Cooling medium: Air cooled
Tempering temperature ℃: 180
Hardness after annealing ≤HBW: 255
Quenching temperature ℃: 1020
Cooling medium: Air cooled
Tempering temperature ℃: 180
Hardness value after tempered /≥ HRC: 61
MELTING PROCESS
This alloy is generally smelt in electric arc furnace (EAF ) or IFF + VD / LF + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining.
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutlery for medical equipments
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T40 - 400mm X W50 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
MELTING PROCESS
This alloy is generally smelt in electric arc furnace (EAF ) or IFF + VD / LF + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining.
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutlery for medical equipments
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T40 - 400mm X W50 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, E-mail sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, E-mail sales@ccsteels.com
Hot search：Z160CDV12
Previous page：STR 660
Last page：ASTM A182 Gr.S30453
