EN 30A
2020-10-22 08:23:02 Origin: Remark:0 Click:
Description EN 30A datasheet, EN 30A Chemical, EN 30A Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - EN 30A
TYPE OF STEEL - Ni - Cr Steel
CHEMICAL COMPOSITION (WEIGHT %)
C (%): 0.20 ~ 0.30
Si (%): 0.10 ~ 0.35
Mn (%): 0.50 ~ 0.80
P (%)≤: 0.035
S (%)≤: 0.030
Cr (%): 0.50 ~ 1.50
Si (%): 0.10 ~ 0.35
Mn (%): 0.50 ~ 0.80
P (%)≤: 0.035
S (%)≤: 0.030
Cr (%): 0.50 ~ 1.50
Ni (%): 3.00 ~ 5.00
Mo (%): ≤ 0.25
Mo (%): ≤ 0.25
Other (%): -
Equal to: EN 30A
TYPICAL MECHANICAL PROPERTIES
Condition: Heat treatment
Tensile strength σb≥/MPa: 1180
Yield strength σs≥/MPa: 885
Elongation δ5≥(%): 9
Yield strength σs≥/MPa: 885
Elongation δ5≥(%): 9
Impact strength, AKv ≥/J: -
Hardness HBS: 270 min.
Hardness HBS: 270 min.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
PRODUCT FORMS & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Previous page:EN30A / EN 30
Last page:ASTM A182 Gr.S32053