AISI P6
2021-11-19 16:33:45 Origin： Remark：0 Click：
Specifications AISI P6 Data sheet, Inventory AISI P6 Chemical, Stock Suppliers AISI P6 Properties from Steel melting, ESR melted, Blooming, Hot forging / Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specifications - ASTM A681 - 2004. We also possess the advanced precision machining equipments for catering for your different special requirements.
Official Test Certificate Report: issued by TUV - SGS - BV
TECHNICAL DATASHEET - Grade AISI P6
MATERIAL SPECIFICATIONS - ASTM A681 -2004
MELTING PROCESS - EAF + AOD / + ESR
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION ( Mass weight - % )
C (％): 0.05 ~ 0.15
Si (％): 0.10 ~ 0.40
Mn (％): 0.35 ~ 0.70
P (％)≤ 0.030
S (％)≤: 0.020
Cr (％): 1.25 ~ 1.75
Si (％): 0.10 ~ 0.40
Mn (％): 0.35 ~ 0.70
P (％)≤ 0.030
S (％)≤: 0.020
Cr (％): 1.25 ~ 1.75
Mo (％): -
W (％): -
W (％): -
V (%): -
Ni (%): 3.25 ~ 3.75
HEAT TREATMENT PRACTICE AND HARDNESS
Hot working tenperature ℃ /Starting: 1070~1180
Hot working tenperature ℃ /Starting: 1070~1180
Hot working tenperature ℃ /Ending: 930
Annealing temperature ℃: 840
Hardness after annealing ≤HBW: 207
Quenching temperature ℃: 790~820
Cooling medium: oil cooled
Tempering temperature ℃:
Hardness value after tempered /HRC: 64 ~ 58
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
Annealing temperature ℃: 840
Hardness after annealing ≤HBW: 207
Quenching temperature ℃: 790~820
Cooling medium: oil cooled
Tempering temperature ℃:
Hardness value after tempered /HRC: 64 ~ 58
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements,
and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools
Mechanical parts
Air hammer tools
Piercing tools
PROFILE & DIMENSIONS AVAILABLE
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
