W-Nr 1.2711 Stockist, W-Nr 1.2711 Equivalent Steel
Home > Tool steel > Text

W-Nr 1.2711
2014-10-19 08:57:08   Origin:   Remark:0 Click:

1.2711 (54NiCrMoV6) is a high carbon Nickel - Chromium - Molybdenum - Vanadium cold work alloy tool steel, 1.2711 is widely used to produce the cutting tool, cold/heat distortion mould, Mechanical parts, Air hammer tools, Piercing tools.
ALLOY TOOL STEEL - DIN 54NiCrMoV6 & W-Nr 1.2711
MATERIAL CATEGORY:  Cold work alloy tool steel 
Cold work die includes cold punching mould, wire-drawing die, drawing die, coining die, thread rolling die, cold heading die, cold extrusion die, Based on the working condition, cold work die should have the high hardness, strength, abrasion resistance, toughness, hardenability, quenching degree, and other processing property. This kind of alloy tool steel belongs to  high carbon alloy steel (carbon mass fraction is over 0.80%), Chromium is key element of alloy with mass fraction below 5% generally. 
MATERIAL SPECIFICATIONS - EN ISO 4957: 2000 , DIN 17350 (1980)
PRODUCT DESCRIPTION
The alloy is usually produced by EAF /VD /LF /IFF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright (peeling or centreless grinding) in the softened = SA condition.
Final heat treatment - heat treatment /  spheroidizing annealing
 
CHEMICAL COMPOSITION (WEIGHT %)
C(%):     0.50 ~ 0.60
Si(%):    0.15 ~ 0.35
Mn(%):   0.50 ~ 0.80
P(%)≤:   0.025
S(%)≤:   0.035
Cr(%):    0.60 ~ 0.80
Mo(%):   0.25 ~ 0.35
V(%):     0.08 ~ 0.12
Ni (%): 1.50 ~ 1.80
 
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working tenperature /℃:  1050~850
Annealing temperature /℃:  650~700
Hardness after annealing ≤HBW:  225
Quenching temperature /℃:  830 ~ 870
Cooling medium: oil
Common tempering temperature /℃:  620~700
Hardness after tempering at temperature HRC|100℃:   56
Hardness after tempering at temperature HRC|200℃:   54
Hardness after tempering at temperature HRC|300℃:   51
Hardness after tempering at temperature HRC|400℃:   47
TYPICAL APPLICATIONS
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implements, and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Cutting tools, Mechanical parts, Air hammer tools, Piercing tools.
 
PRODUCT PROFILE  
Round bar / Wire rod (Diameter):  0.50mm to 3000mm
Square bar / Flat bar: 3mm to 2000mm
Plate / Sheet steel / Steel strip: 0.1mm to 2500mm
Width: 8mm to 2500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com

Hot search:W-Nr 1.2711

Previous page:DIN 54NiCrMoV6
Last page:55NiCrMoV6

Share to: